Skip to main content
edited tags
Link
Rick Pannekoek
  • 21.4k
  • 1
  • 18
  • 30
added 181 characters in body
Source Link
Andy Ross
  • 2.2k
  • 12
  • 19

DXA 1.5 for 2013 SP1 - the following docs (in the readme.md) have instructions to work for DXA 2013 SP1, but in the .sln from https://github.com/sdl/dxa-content-management doesnt build succesfully - even after following instructions below

enter image description here

Note that the Sdl.Web.Tridion.Templates.csproj project references CM assemblies in _references subdirectories which are not included in this repository, because these assemblies cannot be distributed without a signed license agreement. In order to build the project, the following CM assemblies will have to be obtained from an SDL Web/Tridion distribution and put in the appropriate _references subdirectories:

2013-sp1:

Tridion.Common.dll
Tridion.ContentManager.Common.dll
Tridion.ContentManager.dll
Tridion.ContentManager.Publishing.dll
Tridion.ContentManager.TemplateTypes.dll
Tridion.ContentManager.Templating.dll
Tridion.ContentManager.TypeRegistration.dll
Tridion.ExternalContentLibrary.dll
Tridion.ExternalContentLibrary.V2.dll
Tridion.Logging.dll

So the topology manager and lib's are referenced which is not compatible with 2013, only Web 8.

Is it possible to get direction on how to obtain a .sln specifically for DXA 1.5 (including the TBBs referenced above and on screenshot attached from DXA poc) so I can upload to my instance?

UPDATE

enter image description here

enter image description here

When I try to add assemblies here https://github.com/dd4t/DD4T.TridionTemplates/releases

2.0.8

If you're using SDL Tridion 2013 GA or SP1, please download DD4T.Templates.2.0.8.zip. If you're using SDL Tridion 2011, you should download DD4T.Templates.2.0.8-Legacy.zip.

I can upload the above, from ThijsBorst successfully.

UPDATE #2

PowerShell Error

enter image description here

This is the entire output when running the installer.

We are trying to import into one publication in an existing BluePrint and do not want to create dxa default hierarchy of publications.. but for any reason during the import it still refers to Publication 100 Master. (Screenshot above)

The items should be created only in the publication we specify by parameter -masterPublication '070MultiProjectPublishDXA' - correct?

PS Drive:\Install\SDLT DXA\SDL DXA .NET 1.5\cms> & '.\cms-import.ps1' -importType master-only -masterPublication '070MultiProjectPublishDXA' -cmsUrl "http://MyInstanceUrl/"

DXA 1.5 for 2013 SP1 - the following docs (in the readme.md) have instructions to work for DXA 2013 SP1, but in the .sln from https://github.com/sdl/dxa-content-management doesnt build succesfully - even after following instructions below

enter image description here

Note that the Sdl.Web.Tridion.Templates.csproj project references CM assemblies in _references subdirectories which are not included in this repository, because these assemblies cannot be distributed without a signed license agreement. In order to build the project, the following CM assemblies will have to be obtained from an SDL Web/Tridion distribution and put in the appropriate _references subdirectories:

2013-sp1:

Tridion.Common.dll
Tridion.ContentManager.Common.dll
Tridion.ContentManager.dll
Tridion.ContentManager.Publishing.dll
Tridion.ContentManager.TemplateTypes.dll
Tridion.ContentManager.Templating.dll
Tridion.ContentManager.TypeRegistration.dll
Tridion.ExternalContentLibrary.dll
Tridion.ExternalContentLibrary.V2.dll
Tridion.Logging.dll

So the topology manager and lib's are referenced which is not compatible with 2013, only Web 8.

Is it possible to get direction on how to obtain a .sln specifically for DXA 1.5 (including the TBBs referenced above and on screenshot attached from DXA poc) so I can upload to my instance?

UPDATE

enter image description here

enter image description here

When I try to add assemblies here https://github.com/dd4t/DD4T.TridionTemplates/releases

2.0.8

If you're using SDL Tridion 2013 GA or SP1, please download DD4T.Templates.2.0.8.zip. If you're using SDL Tridion 2011, you should download DD4T.Templates.2.0.8-Legacy.zip.

I can upload the above, from ThijsBorst successfully.

UPDATE

PowerShell Error

enter image description here

This is the entire output when running the installer.

We are trying to import into one publication in an existing BluePrint and do not want to create dxa default hierarchy of publications.. but for any reason during the import it still refers to Publication 100 Master. (Screenshot above)

The items should be created only in the publication we specify by parameter -masterPublication '070MultiProjectPublishDXA' - correct?

DXA 1.5 for 2013 SP1 - the following docs (in the readme.md) have instructions to work for DXA 2013 SP1, but in the .sln from https://github.com/sdl/dxa-content-management doesnt build succesfully - even after following instructions below

enter image description here

Note that the Sdl.Web.Tridion.Templates.csproj project references CM assemblies in _references subdirectories which are not included in this repository, because these assemblies cannot be distributed without a signed license agreement. In order to build the project, the following CM assemblies will have to be obtained from an SDL Web/Tridion distribution and put in the appropriate _references subdirectories:

2013-sp1:

Tridion.Common.dll
Tridion.ContentManager.Common.dll
Tridion.ContentManager.dll
Tridion.ContentManager.Publishing.dll
Tridion.ContentManager.TemplateTypes.dll
Tridion.ContentManager.Templating.dll
Tridion.ContentManager.TypeRegistration.dll
Tridion.ExternalContentLibrary.dll
Tridion.ExternalContentLibrary.V2.dll
Tridion.Logging.dll

So the topology manager and lib's are referenced which is not compatible with 2013, only Web 8.

Is it possible to get direction on how to obtain a .sln specifically for DXA 1.5 (including the TBBs referenced above and on screenshot attached from DXA poc) so I can upload to my instance?

UPDATE

enter image description here

enter image description here

When I try to add assemblies here https://github.com/dd4t/DD4T.TridionTemplates/releases

2.0.8

If you're using SDL Tridion 2013 GA or SP1, please download DD4T.Templates.2.0.8.zip. If you're using SDL Tridion 2011, you should download DD4T.Templates.2.0.8-Legacy.zip.

I can upload the above, from ThijsBorst successfully.

UPDATE #2

PowerShell Error

enter image description here

This is the entire output when running the installer.

We are trying to import into one publication in an existing BluePrint and do not want to create dxa default hierarchy of publications.. but for any reason during the import it still refers to Publication 100 Master. (Screenshot above)

The items should be created only in the publication we specify by parameter -masterPublication '070MultiProjectPublishDXA' - correct?

PS Drive:\Install\SDLT DXA\SDL DXA .NET 1.5\cms> & '.\cms-import.ps1' -importType master-only -masterPublication '070MultiProjectPublishDXA' -cmsUrl "http://MyInstanceUrl/"

added an updated, screenshot.
Source Link
Andy Ross
  • 2.2k
  • 12
  • 19

DXA 1.5 for 2013 SP1 - the following docs (in the readme.md) have instructions to work for DXA 2013 SP1, but in the .sln from https://github.com/sdl/dxa-content-management doesnt build succesfully - even after following instructions below

enter image description here

Note that the Sdl.Web.Tridion.Templates.csproj project references CM assemblies in _references subdirectories which are not included in this repository, because these assemblies cannot be distributed without a signed license agreement. In order to build the project, the following CM assemblies will have to be obtained from an SDL Web/Tridion distribution and put in the appropriate _references subdirectories:

2013-sp1:

Tridion.Common.dll
Tridion.ContentManager.Common.dll
Tridion.ContentManager.dll
Tridion.ContentManager.Publishing.dll
Tridion.ContentManager.TemplateTypes.dll
Tridion.ContentManager.Templating.dll
Tridion.ContentManager.TypeRegistration.dll
Tridion.ExternalContentLibrary.dll
Tridion.ExternalContentLibrary.V2.dll
Tridion.Logging.dll

So the topology manager and lib's are referenced which is not compatible with 2013, only Web 8.

Is it possible to get direction on how to obtain a .sln specifically for DXA 1.5 (including the TBBs referenced above and on screenshot attached from DXA poc) so I can upload to my instance?

UPDATE

enter image description here

enter image description here

When I try to add assemblies here https://github.com/dd4t/DD4T.TridionTemplates/releases

2.0.8

If you're using SDL Tridion 2013 GA or SP1, please download DD4T.Templates.2.0.8.zip. If you're using SDL Tridion 2011, you should download DD4T.Templates.2.0.8-Legacy.zip.

I cannot loadcan upload the DD4T.Templates or DD4T.Template.Base shown below to getabove, from ThijsBorst successfully.

UPDATE

PowerShell Error

enter image description here

This is the proper assemblies I needentire output when running the installer.

We are trying to import into one publication in an existing BluePrint and do not want to create dxa default hierarchy of publications.. but for 2013 SP1any reason during the import it still refers to Publication 100 Master. (Screenshot above)

enter image description here The items should be created only in the publication we specify by parameter -masterPublication '070MultiProjectPublishDXA' - correct?

DXA 1.5 for 2013 SP1 - the following docs (in the readme.md) have instructions to work for DXA 2013 SP1, but in the .sln from https://github.com/sdl/dxa-content-management doesnt build succesfully - even after following instructions below

enter image description here

Note that the Sdl.Web.Tridion.Templates.csproj project references CM assemblies in _references subdirectories which are not included in this repository, because these assemblies cannot be distributed without a signed license agreement. In order to build the project, the following CM assemblies will have to be obtained from an SDL Web/Tridion distribution and put in the appropriate _references subdirectories:

2013-sp1:

Tridion.Common.dll
Tridion.ContentManager.Common.dll
Tridion.ContentManager.dll
Tridion.ContentManager.Publishing.dll
Tridion.ContentManager.TemplateTypes.dll
Tridion.ContentManager.Templating.dll
Tridion.ContentManager.TypeRegistration.dll
Tridion.ExternalContentLibrary.dll
Tridion.ExternalContentLibrary.V2.dll
Tridion.Logging.dll

So the topology manager and lib's are referenced which is not compatible with 2013, only Web 8.

Is it possible to get direction on how to obtain a .sln specifically for DXA 1.5 (including the TBBs referenced above and on screenshot attached from DXA poc) so I can upload to my instance?

UPDATE

enter image description here

enter image description here

When I try to add assemblies here https://github.com/dd4t/DD4T.TridionTemplates/releases

2.0.8

If you're using SDL Tridion 2013 GA or SP1, please download DD4T.Templates.2.0.8.zip. If you're using SDL Tridion 2011, you should download DD4T.Templates.2.0.8-Legacy.zip.

I cannot load the DD4T.Templates or DD4T.Template.Base shown below to get the proper assemblies I need for 2013 SP1.

enter image description here

DXA 1.5 for 2013 SP1 - the following docs (in the readme.md) have instructions to work for DXA 2013 SP1, but in the .sln from https://github.com/sdl/dxa-content-management doesnt build succesfully - even after following instructions below

enter image description here

Note that the Sdl.Web.Tridion.Templates.csproj project references CM assemblies in _references subdirectories which are not included in this repository, because these assemblies cannot be distributed without a signed license agreement. In order to build the project, the following CM assemblies will have to be obtained from an SDL Web/Tridion distribution and put in the appropriate _references subdirectories:

2013-sp1:

Tridion.Common.dll
Tridion.ContentManager.Common.dll
Tridion.ContentManager.dll
Tridion.ContentManager.Publishing.dll
Tridion.ContentManager.TemplateTypes.dll
Tridion.ContentManager.Templating.dll
Tridion.ContentManager.TypeRegistration.dll
Tridion.ExternalContentLibrary.dll
Tridion.ExternalContentLibrary.V2.dll
Tridion.Logging.dll

So the topology manager and lib's are referenced which is not compatible with 2013, only Web 8.

Is it possible to get direction on how to obtain a .sln specifically for DXA 1.5 (including the TBBs referenced above and on screenshot attached from DXA poc) so I can upload to my instance?

UPDATE

enter image description here

enter image description here

When I try to add assemblies here https://github.com/dd4t/DD4T.TridionTemplates/releases

2.0.8

If you're using SDL Tridion 2013 GA or SP1, please download DD4T.Templates.2.0.8.zip. If you're using SDL Tridion 2011, you should download DD4T.Templates.2.0.8-Legacy.zip.

I can upload the above, from ThijsBorst successfully.

UPDATE

PowerShell Error

enter image description here

This is the entire output when running the installer.

We are trying to import into one publication in an existing BluePrint and do not want to create dxa default hierarchy of publications.. but for any reason during the import it still refers to Publication 100 Master. (Screenshot above)

The items should be created only in the publication we specify by parameter -masterPublication '070MultiProjectPublishDXA' - correct?

deleted 69 characters in body
Source Link
Andy Ross
  • 2.2k
  • 12
  • 19
Loading
deleted 178 characters in body
Source Link
Andy Ross
  • 2.2k
  • 12
  • 19
Loading
added 571 characters in body
Source Link
Andy Ross
  • 2.2k
  • 12
  • 19
Loading
added 571 characters in body
Source Link
Andy Ross
  • 2.2k
  • 12
  • 19
Loading
updated question with screenshot
Source Link
Andy Ross
  • 2.2k
  • 12
  • 19
Loading
added 14 characters in body
Source Link
Bart Koopman
  • 29.6k
  • 3
  • 40
  • 90
Loading
Tweeted twitter.com/StackTridion/status/768567507288461313
added 67 characters in body; edited title
Source Link
Andy Ross
  • 2.2k
  • 12
  • 19
Loading
Source Link
Andy Ross
  • 2.2k
  • 12
  • 19
Loading